Applicable Systems
TransSteel 2700
Symptoms
The arc could not be ignited within the specified time.
Possible Causes
- The arc could not be ignited within the specified time.
Troubleshooting Steps
- Step 1: Check the workpiece connection
Check if the issue is resolved - Step 2: Check the welding parameters
Check if the issue is resolved - Step 3: Ensure the wire is feeding properly
Check if the issue is resolved - Step 4: Check the gas coverage.
Check if the issue is resolved
How to Reset
Power cycle the welding system and wait for the self-test to complete. If the error persists, contact Fronius service.
Source: Fronius welding technology documentation and xueke.org troubleshooting guide
Category: Welding