Lower deceleration switch position abnormal

Fujitec Elevator Medium Elevator

Model: Generic | Code: 1D

Applicable Systems
Fujitec Control System

Symptoms

Lower deceleration switch working position abnormal; action distance exceeds 25mm

Possible Causes

  • Switch misalignment
  • switch or wiring fault
  • IF61 board fault
  • mechanical shift

Troubleshooting Steps

  1. Step 1: Check lower deceleration switch position
    Verify the fault is resolved after completing this step.
  2. Step 2: verify switch and wiring
    Verify the fault is resolved after completing this step.
  3. Step 3: inspect IF61
    Verify the fault is resolved after completing this step.
  4. Step 4: adjust position
    Verify the fault is resolved after completing this step.

How to Reset

Power cycle after adjustment

Related Fujitec Fault Codes

Comments (0)

Share your experience to help others facing the same problem.

No comments yet. Be the first to share your experience!

Leave a Comment

Source: baijiahao (huasheng fujitec); toutiao.com/w/1874164112328836

Category: Elevator