Applicable Systems
Speedmaster XL 106
Symptoms
The printing press reports a feeder paper jam. Sheets are jamming at the feeder, interrupting continuous feeding.
Possible Causes
- Suction head timing incorrect for the paper stock
- Feed table blow air pressure too low
- Sheet separator springs worn or misadjusted
Troubleshooting Steps
- Step 1: Check the feeder suction and blow air settings
Settings match the paper stock specification - Step 2: Verify suction head timing against the press speed
Timing is synchronized with press speed - Step 3: Inspect and adjust sheet separator components
Separators guide sheets without jams
How to Reset
To reset: Clear the paper jam and adjust feeder settings, then restart feeding.
Comments (0)
Share your experience to help others facing the same problem.
Leave a Comment
Source: Heidelberg Speedmaster Operating Manual, Heidelberger Druckmaschinen AG
Category: Printing
No comments yet. Be the first to share your experience!