Universal Robots e-Series Error Code C341A95: Detailed status error: System error. Malfunction inside the circuitry.

Universal Robots Robot Major System

Model: e-Series (UR3e/UR5e/UR10e/UR16e/UR20/UR30) | Code: C341A95

Applicable Systems
UR3 UR5 UR10 UR3e UR5e UR10e UR16e UR20 UR30

Symptoms

A system error occured inside the motor encoder. To reset the System error bit try to cycle the power supply.

Possible Causes

  • A system error occured inside the motor encoder. To reset the System error bit try to cycle the power supply.

Troubleshooting Steps

  1. Step 1: Conduct a complete rebooting sequence,
    Check if the issue is resolved after this step
  2. Step 2: Update software,
    Check if the issue is resolved after this step
  3. Step 3: Replace the motor-encoder PCBA - Contact your local Universal Robots service provider for assistance
    Check if the issue is resolved after this step

How to Reset

Power cycle the robot controller and perform a complete reboot sequence. If the error persists, update the software to the latest version.

Related Universal Robots Fault Codes

Comments (0)

Share your experience to help others facing the same problem.

No comments yet. Be the first to share your experience!

Leave a Comment

Source: Universal Robots Official Error Codes Directory (https://www.universal-robots.com/manuals/EN/PDF/Shared/ErrorCodes/ErrorCodes.pdf)

Category: Robot