Universal Robots e-Series Error Code C740A31: The robot current offset limit check has failed

Universal Robots Robot Minor Power

Model: e-Series (UR3e/UR5e/UR10e/UR16e/UR20/UR30) | Code: C740A31

Applicable Systems
UR3 UR5 UR10 UR3e UR5e UR10e UR16e UR20 UR30

Symptoms

The robot current offset value is outside of the allowed range

Possible Causes

  • The robot current offset value is outside of the allowed range

Troubleshooting Steps

  1. Step 1: Update software,
    Check if the issue is resolved after this step
  2. Step 2: Contact your local Universal Robots service provider for assistance.
    Check if the issue is resolved after this step

How to Reset

Power cycle the robot controller and perform a complete reboot sequence. If the error persists, update the software to the latest version.

Related Universal Robots Fault Codes

Comments (0)

Share your experience to help others facing the same problem.

No comments yet. Be the first to share your experience!

Leave a Comment

Source: Universal Robots Official Error Codes Directory (https://www.universal-robots.com/manuals/EN/PDF/Shared/ErrorCodes/ErrorCodes.pdf)

Category: Robot