Universal Robots e-Series Error Code C749A32: Unexpected transfer size {unsigned} when updating digital output

Universal Robots Robot Minor System

Model: e-Series (UR3e/UR5e/UR10e/UR16e/UR20/UR30) | Code: C749A32

Applicable Systems
UR3 UR5 UR10 UR3e UR5e UR10e UR16e UR20 UR30

Symptoms

An internal communication issue occurred while updating the output state

Possible Causes

  • An internal communication issue occurred while updating the output state

Troubleshooting Steps

  1. Step 1: Conduct a complete rebooting sequence,
    Check if the issue is resolved after this step
  2. Step 2: Update software,
    Check if the issue is resolved after this step
  3. Step 3: Contact your local Universal Robots service provider for assistance Software Name: PolyScope 5 Software Version: 5.26 Document Version:10.20.358
    Check if the issue is resolved after this step

How to Reset

Power cycle the robot controller and perform a complete reboot sequence. If the error persists, update the software to the latest version.

Related Universal Robots Fault Codes

Comments (0)

Share your experience to help others facing the same problem.

No comments yet. Be the first to share your experience!

Leave a Comment

Source: Universal Robots Official Error Codes Directory (https://www.universal-robots.com/manuals/EN/PDF/Shared/ErrorCodes/ErrorCodes.pdf)

Category: Robot