Applicable Systems
Electrolux Dryer
Symptoms
The dryer displays error E012, indicating the drying program has exceeded the maximum allowed time. The load is not drying within the expected window, suggesting a heat or airflow problem.
Possible Causes
- Heating element producing insufficient heat due to partial failure
- Large or extra-wet load exceeding the dryer's rated capacity
- Exhaust vent partially blocked, preventing moisture removal
Troubleshooting Steps
- Step 1: Check if the heating element is glowing during the dry cycle
Element glows bright red evenly along its entire length - Step 2: Verify the load size does not exceed the drum capacity
Load fills no more than two-thirds of the drum volume - Step 3: Inspect the exhaust vent for partial blockage or excessive length
Vent is clear and total duct length is within manufacturer maximum
How to Reset
To reset: 1) Reduce the load size or select a longer cycle. 2) Clear any exhaust restrictions. 3) Press the power button to clear the error and restart.
Comments (0)
Share your experience to help others facing the same problem.
Leave a Comment
Source: Electrolux Dryer Service Manual, Electrolux Home Products
Category: Air Dryer
No comments yet. Be the first to share your experience!