Applicable Systems
Vodopack 24V
Symptoms
The packaging line reports a conveyor belt jam. The conveyor has stopped due to an obstruction or mechanical binding.
Possible Causes
- Product or packaging material jammed on the conveyor
- Conveyor belt misaligned or tracking off-center
- Conveyor drive chain or belt broken or slipped off
Troubleshooting Steps
- Step 1: Inspect the conveyor path for product or material jams
Conveyor path is clear of obstructions - Step 2: Check belt tracking and tension adjustment
Belt runs centered with proper tension - Step 3: Verify drive chain or belt is intact and engaged
Drive transmits power to the conveyor correctly
How to Reset
To reset: Clear the conveyor jam, then restart the conveyor from the HMI.
Comments (0)
Share your experience to help others facing the same problem.
Leave a Comment
Source: Krones Packaging Line Manual, Krones AG
Category: Packaging
Published: 2026-10-04
No comments yet. Be the first to share your experience!